Saving And Recalling The Calibration; Saving The Calibration - HP 8712ES User Manual

Saving and Recalling the Calibration

Saving the Calibration

After you have performed your calibration, it is automatically saved in
non-volatile (battery-backed) memory. However, it will be overwritten
with subsequent calibrations of the same type. To save your calibration
to the analyzer's internal non-volatile RAM disk, volatile RAM disk, or a
floppy disk in the built-in disk drive:
1. Press
SAVE RECALL
toggle the save cal function to ON.
2. Press Prior Menu Select Disk
calibration saved. See
on page 4-55 for information on the three available selections.
3. Press Prior Menu Save State
4. The analyzer will save the calibration along with the current
instrument state to a file on the disk you have selected.
ES User's Guide
Calibrating for Increased Measurement Accuracy
Saving and Recalling the Calibration
Define Save Cal on OFF
and select where you want the
"Saving and Recalling Measurement Results"
to save the calibration.
which will
6-33