HP 8712ES User Manual page 355

List Trace
Values
Load
Load CC
From Disk
Softkey in the define hardcopy menu. Defines the hardcopy as a list of
data trace values. Trace values for Cartesian format are in two
columns: frequency and amplitude. Trace values for polar format are in
three columns: frequency, magnitude, and phase. Trace values for
Smith chart format are also in three columns: frequency, resistance
and complex impedance.
NOTE
See "Printing and Plotting Measurement Results" on page 4-78
more information.
Access Keys:
HARDCOPY
Softkey in the modify kit menu. Allows you to modify the following
characteristics of the load calibration standard in your calibration kit:
delay, loss, and Z .
0
See "Calibration Kits" on page 6-23
Access Keys:
CAL
Modify (connector type)
Softkey in the update correction constants menu. Loads a temporary
copy of CC data from floppy disk to the analyzer's internal volatile
RAM.
See the Service Guide for more information.
Access Keys:
SYSTEM OPTIONS
ES User's Guide
Plotting lists with many data points can be very
time consuming.
Define Hardcopy
for more information.
More Cal Cal Kit
Service
Hardkey/Softkey Reference
for
Update Corr Const
L
8-49