HP 8712ES User Manual page 398

Tracking
on OFF
Port 1
Extension
Port 2
Extension
Transmissn
Trigger
Trigger Source
Hardkey/Softkey Reference
T
Softkey in the marker search menu. Toggle to ON if you want the
marker search functions to be updated with each sweep. When toggled
OFF (default setting), the functions are performed only once, when
selected.
See "Using Markers" on page 4-3
Access Keys:
MARKER
Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 1.
See "Port Extensions" on page 5-18
Access Keys:
CAL
Port Ext's on OFF
Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 2.
See "Port Extensions" on page 5-18
Access Keys:
CAL
Port Ext's on OFF
(Option 100 only) Softkey in the cable menu. Selects the S
transmission) type of measurement.
See "Using the BEGIN Key to Configure Measurements" on page 3-16
for more information.
Access Keys:
BEGIN
Softkey in the source
triggering the analyzer. The analyzer can be triggered continuously
(default setting) or once. It can be triggered internally (default setting),
externally, or externally one frequency point at a time.
Softkey in the trigger menu. Displays the menu for the choice of
internal or external triggering.
Access Keys:
MENU
8-92
for more information.
Marker Search
for more information.
More Cal Port Extensions
for more information.
More Cal Port Extensions
Cable
. Displays the menu with choices for
MENU
Trigger
(forward
21
ES User's Guide