HP 8712ES User Manual page 381

S11 Refl Port1
S21 Fwd Trans
S12 Rev Trans
S
Softkey in the amplifier, filter, broadband passive, mixer, and
measurement menus. Selects the S
measurement. Power is output from the analyzer's port 1 and also
measured there.
See "Measuring S11 Reflection Port 1 using a One-Port Calibration" on
page 3-48 for more information.
Access Keys:
MEAS 1
Filter or Broadband Passive
Softkey in the amplifier, filter, broadband passive, and measurement
menus. Selects the S
Power is output from the analyzer's port 1 and measured at the
analyzer's port 2.
See "Measuring S21 Forward Transmission using an Enhanced
Response Calibration" on page 3-41
Access Keys:
MEAS 1
Filter or Broadband Passive
Softkey in the amplifier, broadband passive, and measurement menus.
Selects the S (reverse transmission) type of measurement. Power is
12
output from the analyzer's port 2 and measured at the analyzer's
port 1.
See "Measuring S21 Forward Transmission using an Enhanced
Response Calibration" on page 3-41
(S ) measurement.
21
Access Keys: MEAS 1
Filter or Broadband Passive
ES User's Guide
(forward reflection) type of
11
or . Also
MEAS 2
or Mixer
(forward transmission) type of measurement.
21
for more information.
or . Also
MEAS 2
for more information on a similar
or MEAS 2 . Also
Hardkey/Softkey Reference
, Amplifier
BEGIN
, Amplifier
BEGIN
BEGIN , Amplifier
S
or
or
or
8-75