HP 8712ES User Manual page 443

Table 9-8 Test Port Input (continued)
System Dynamic Range
HP 8712ES:
50 Ω:
Narrowband
Broadband (Internal)
75 Ω:
Narrowband
Broadband (Internal)
HP 8714ES:
50 Ω:
Narrowband
Broadband (Internal)
75 Ω:
Narrowband
Broadband (Internal)
a. The System Dynamic Range is calculated as the difference between the receiver noise floor and
the minimum of either the source maximum output (maximum power setting minus output
power level accuracy) or the receiver maximum input. System Dynamic Range applies to trans-
mission measurements only, since reflection measurements are limited by directivity. The Sys-
tem Dynamic Range for HP 8714 ET/ES 75 Ω analyzers is not a specification for frequencies >2
GHz; it is a characteristic. For the HP 8712ES/8714ES, external broadband detectors will pro-
vide more dynamic range than the internal broadband detectors.
HP 8712ET/ES and HP 8714ET/ES Test Port Input
Description
a
(continued)
ES User's Guide
Spec.
(in dB)
System Bandwidths:
Fine Fine
(15 Hz) (15 Hz)
104 115
46 53
99 111
39 47
101 112
43 50
96 108
36 44
Specifications
Typical
(in dB)
Med Wide Wide
(4000 Hz) (6500 Hz)
90 57
46 33
87 54
40 27
87 54
43 30
84 51
37 24
9-33