HP 8712ES User Manual page 329

Default
Response
Define Save
Delay
Delay Aperture
Delete All Files
Delete All
Limits
Softkey in the CAL
S (transmission) measurement mode. Use this key to recall a
12
response calibration that was performed at the factory or during
servicing. Corrects for frequency response errors.
See Chapter 6 for more information.
Softkey in the
SAVE RECALL
instrument state, measurement calibration, measurement data, or
combinations. Allows the choice of saving trace data in ASCII format
for output to spreadsheets. ASCII data is compatible with Lotus 1-2-3
and Touchstone formats.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Softkey in the open, short, load, and through menus. Allows you to
modify the delay characteristic of the open, short, load, or through
calibration standards in your calibration kit.
See "Calibration Kits" on page 6-23
Access Keys:
CAL
Modify (connector type)
Softkey in the
AVG
delay measurements.
Softkey in the file utilities menu. Deletes all files in the current
directory. Before the files are deleted, you will be asked to confirm this
selection. Also deletes empty directories on DOS disks.
See "Other File Utilities" on page 4-63
Access Keys:
SAVE RECALL
Softkey in the delete limit menu. Deletes all of the limit lines in the
limit line table. Asks for confirmation before deletion occurs.
See "Using Limit Testing" on page 4-28
limit lines.
Access Keys:
DISPLAY
ES User's Guide
menu and the response cal menu when in S
menu. Displays the menu to save the
for more information.
More Cal Cal Kit
, Open or
menu. Sets the aperture in Hz or % for group
for more information.
File Utilities
for more information on using
Limit Menu
Hardkey/Softkey Reference
Short or Load or
Delete Limit
D
or
21
for
Thru
8-23