PARALLEL PORT
Figure 7-4
Front/Rear Panel
Connectors
This rear panel connector is used with peripherals with parallel interface
such as printers and plotters. The pin-out is standard IBM PC
compatible Centronics interface, using a female DB-25 connector, as
shown in
Figure
7-4. All pins are ESD protected; data and strobe pins
have 2200 pF capacitors; voltage levels are TTL compatible; output pins
can source 15 mA and sink 24 mA. See
page 4-71
for information on using this port with a printer or plotter.
Parallel Port Pin-outs
7-10
"Configure the Hardcopy Port" on
ES User's Guide