Figure 4-28
NOTE
NOTE
List Trace Values
Trace Values
Figure 4-28
shows the trace values for a transmission measurement in
log mag format. Trace values for polar format will be frequency,
magnitude, and phase; while trace values for Smith chart format will be
frequency, resistance, and complex impedance.
You may notice a decrease in measurement speed when the network
analyzer is outputting to a printer or plotter that doesn't have a built-in
buffer. For the fastest possible hardcopy dump to such devices, press
Trigger
MENU
the following table for some typical print times.
ES User's Guide
Printing and Plotting Measurement Results
outputs only the marker table. (This selection
allows printing of the limit-line table as well.)
Hold
before beginning the print or plot. Refer to
Using Instrument Functions
4-81