HP 8712ES User Manual page 331

Detection
Options
Diagnostic
Utilities
Directory
Utilities
Disp Freq
Resolution
DISPLAY
Display
User List
Softkey in the meas 1 more and meas 2 more menus. Selects
measurement type: narrowband or broadband internal, broadband
external or aux input.
See "Measuring Devices with Your Network Analyzer" on page 3-3
more information on detection modes.
Access Keys:
MEAS 1
Softkey in the LAN port setup menu. Displays the menu to set the IP
address to ping and to perform ping.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the file utilities menu. Displays the menu to change, make,
or remove directories on DOS disks.
See "To Use Directory Utilities" on page 4-65
Access Keys:
SAVE RECALL
Softkey in the
FREQ
resolutions: MHz, kHz, or Hz. For example, a frequency of
1,234,567 Hz can be displayed as: 1 MHz (note rounding down),
1.235 MHz (note rounding up), or 1.234 567 MHz. Default is kHz.
Hardkey in the CONFIGURE area of the front panel. Displays the
menu with selections concerning type of data to be displayed, split or
full screen, title and limit lines.
Softkey in the users setup menu. Displays a table that lists all of the
login user names on the access list of your analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
ES User's Guide
or , More
MEAS 2
LAN
File Utilities
menu. Selects one of the displayed frequency
LAN
Hardkey/Softkey Reference
LAN Port Setup
for more information.
Login User Setup
D
for
8-25