HP 8712ES User Manual page 369

Open
Operating
Parameters
Optional
Boot Host
Optional
File Path
O
Softkey in the modify kit menu. Allows you to modify the following
characteristics of the open calibration standard in your calibration kit:
C , C , C , C , delay, loss, and Z
0 1 2 3
See "Calibration Kits" on page 6-23
Access Keys:
CAL
Modify (connector type)
Softkey in the
SYSTEM OPTIONS
measurement channel settings, cal kit definitions, instrument settings,
and instrument configuration.
Softkey in the BOOTP setup menu. Allows you to set the host name or
host IP address of the only remote host you want to receive BOOTP
requests. If the optional boot host is not designated, the analyzer will
broadcast a BOOTP request at boot time and will accept a response
from any BOOTP server. If you don't want to designate an optional
boot host, enter a null or empty string by selecting
Enter .
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the BOOTP setup menu. Allows you to set the file path to
the only boot file you want to receive at boot time. If you don't want to
designate an optional file path, enter a null or empty string by
selecting Clear Entry Enter
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
ES User's Guide
.
0
for more information.
More Cal Cal Kit
menu. Displays several screens of
LAN
.
LAN
Hardkey/Softkey Reference
Clear Entry
BOOTP Setup
BOOTP Setup
O
8-63