HP 8712ES User Manual page 95

Rf network analyzers

Hide thumbs Also See for HP 8712ES:

Table of Contents

Cal Kit Model

Measuring S21 Forward Transmission using an Enhanced Response Calibration

To perform an enhanced transmission response calibration, you will need

one of the following calibration kits depending on the nominal impedance

of your analyzer:

By convention, cal kit labels in the analyzer indicate the sex of the port

with which they are used. For example, the default cal kit for the

analyzer is type-N female because the front panel RF ports are female

(the calibration standards, in turn, have male connectors).

If you are going to be using calibration standards other than the default

(female type-N), you must select a calibration kit to match the port(s) at

your calibration reference plane. Do this by pressing

and then selecting the appropriate type.

ES User's Guide

Making Measurements

Show Quick Links

Table of Contents