HP 8712ES User Manual page 370

Parameters
Received
Password
Path FWD rev
Perform Ping
Perform Secure
Phase
Hardkey/Softkey Reference
P
P
Softkey in the BOOTP setup menu. Displays the BOOTP parameters
received from the BOOTP host: host address, IP address, gateway IP
address, subnet mask, and file path.
See The LAN Interface User's Guide Supplement for more information.
Softkey in the add login user menu and delete login user menu.
Displays a dialog box for entering a password to be added or deleted on
the access list of your analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Add Login User
Softkey in the measurement menus. Allows you to toggle the direction
of the source signal path.
Softkey in the diagnostic utilities menu. Allows you access the ping
utility to determine the status of the connections between devices and
a network.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Diagnostic Utilities
Softkey in the secure menu. Use with caution: secured program lines
can't be listed, seen, or edited.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SYSTEM OPTIONS
Softkey in the
FORMAT
phase portion of the data, measured in degrees. This format displays
the phase shift versus frequency.
8-64
LAN
or Delete Login User
LAN
IBASIC
menu. Displays a Cartesian format of the
Login User Setup
LAN Port Setup
Utilities Secure
ES User's Guide
,