HP 8712ES User Manual page 401

User 2-Port
User BEGIN
on OFF
User
Cal Kit (A–J)
User ID
User Name
Softkey in the CAL
perform a user-defined two-port calibration. Restores a previous user
two-port calibration if current analyzer parameters are compatible
with those used during the previous calibration. Corrects for
directivity, source match, load match and frequency response errors.
Also corrects for crosstalk errors when the
selected.
See "Measuring S-Parameters using a Two-Port Calibration" on
page 3-19 for more information.
Softkey in the
BEGIN
See "The User BEGIN Function" on page 3-18
Softkeys in the more cal kits menu. Assigns any of User Cal Kits A–J
to the selected port in the cal kit table (viewable with
More Cal Kits ).
See "Calibration Kits" on page 6-23
Access Keys:
CAL
Softkey in the authentication menu. Allows you to enter a User ID for
your NFS remote file system. The default User ID value is 2001.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Authentication
Softkey in the add login user menu and delete login user menu.
Displays a dialog box for entering a login user name to be added or
deleted on the access list of your analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Add Login User
ES User's Guide
or User 2-Port . Press
menu.
for more information.
More Cal Cal Kit
LAN
LAN
or Delete Login User
Hardkey/Softkey Reference
User 2-Port to
Isolation on OFF
for more information.
Cal Kit
More Cal Kits
NFS Device Setup
Login User Setup
U
key is
and
,
8-95