Commissioning
6.5 Commissioning via handheld programmer
6.5.3
Programming
Note
• While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
• The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 2 minutes, depending on the menu level).
Change parameter settings and set operating conditions to suit your specific application. For
remote operation, see Operating via SIMATIC PDM (Page 59) or Operating via FDT (field device
tool) (Page 77).
Parameter menus
Note
Parameters
For the complete list of parameters with instructions, see Parameter Reference (Page 105).
Parameters are identified by name and organized into function groups, then arranged in a 5-
level menu structure, see HMI menu (Page 203).
2. SETUP
2.7. SIGNAL PROCESSING
2.7.3. ECHO SELECT
48
2.7.3.1. ALGORITHM
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD