Programming; Programming The Radar Device; Parameter Menus_Ff - Siemens SITRANS LR560 Operating Instructions Manual

6.5.5

Programming

6.5.5.1

Programming the radar device

Note
• While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
• The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 2 minutes, depending on the menu level).
6.5.5.2

Parameter menus_FF

Change parameter settings and set operating conditions to suit your specific application. For
remote operation, see Operating via AMS Device Manager (Page 61)
Note
For the complete list of parameters with instructions, see Parameter Reference (Page 117).
Parameters are identified by name and organized into function groups, then arranged in a 5-
level menu structure, see HMI menu (Page 201).
1. QUICK START
2. SETUP
2.1 IDENTIFICATION
2.2 DEVICE
2.5. AIFB1
2.5.1. STATIC REV. NO.
2.5.2. MODE
2.5.3. CHANNEL
2.5.4. INPUT SCALING
2.5.4. 1. LOWER VALUE
LR560 (FOUNDATION FIELDBUS)
Operating Instructions, 06/2018, A5E34648692-AE
6.5 Commissioning via handheld programmer
Commissioning
49