Communication - Siemens SITRANS LR560 Operating Instructions Manual

Service schedule, see SERVICE SCHEDULE (4.7.) (Page 140)
● Service interval
● Time since last service
● Time until next service
● Activation of reminders
● Reminder 1 before service (Required)
● Reminder 2 before service (Demanded)
Click on Service Performed to reset Time until next service to the full service interval.
Calibration schedule, see CALIBRATION SCHEDULE (4.8.) (Page 143)
● Calibration interval
● Time since last calibration
● Time until next calibration
● Activation of reminders
● Reminder 1 before Calibration (Required)
● Reminder 2 before Calibration (Demanded)
Electronic Temperature, see ELECTRONIC TEMPERATURE (3.5.) (Page 132)
● Electronic temperature
● Lowest value
● Highest value
Wear, see POWERED HOURS (4.3.) (Page 139)
● Time in operation (Reset to 0 after clicking Sensor Replaced)
● Poweron resets
7.1.3.3

Communication

Navigate to Communication to read the following:
Tag; Manufacturer's ID; Device ID; Product ID; Device Revision; EDD Revision; Universal
Command Revision
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
Operating
7.1 Remote operation
93