Commissioning; Basic Safety Notes - Siemens SITRANS LR560 Operating Instructions Manual

Commissioning

6.1

Basic safety notes

Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
• Do not commission the device until it has been mounted completely and connected in
accordance with the information in Installing/mounting (Page 23).
• Before commissioning take the effect on other devices in the system into account.
Commissioning and operation with pending error
If an error message appears, correct operation in the process is no longer guaranteed.
• Check the gravity of the error.
• Correct the error.
• If the error still exists:
– Take the device out of operation.
– Prevent renewed commissioning.
Hot surfaces
Risk of burns resulting from hot surfaces.
• Take corresponding protective measures, for example by wearing protective gloves.
Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection
specified on the nameplate or in Technical data (Page 163) is no longer guaranteed.
• Make sure that the device is securely closed.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
WARNING
WARNING
WARNING
CAUTION
6
41