Programming - Siemens SITRANS LR560 Compact Operating Instructions

Key
5.5.4

Programming

Parameter menus
Note
For the complete list of parameters with instructions, and Dimension drawings, see the full
operating instructions.
1. Enter PROGRAM
mode
LR560
Compact Operating Instructions, 06/2018, A5E39693895-AA
Function Result
RIGHT arrow opens Opens the top level menu.
PROGRAM mode
UP or DOWN arrow Local display shows measured value in either linear units or percent.
toggles between line‐
ar units and percent
Using local display buttons:
● Press RIGHT
Using handheld programmer:
1. Point the programmer at the display from a maximum distance of
300 mm (1 ft).
2. RIGHT
3. Mode opens the menu level last displayed in PROGRAM
last 10 minutes, or menu level 1 if power has been cycled since then.
5.5 Commissioning via handheld programmer
activates PROGRAM mode and opens menu level 1.
Commissioning
within the
37