Commissioning Via Local Display; Local Operation; Quick Start Wizard Via The Local Display Push Buttons - Siemens SITRANS LR560 Operating Instructions Manual

6.4

Commissioning via local display

6.4.1

Local operation

SITRANS LR560 carries out its level measurement tasks according to settings made via
parameters. The settings can be modified locally via the optional local graphical display which
consists of an LCD display with buttons. You can use either the push buttons or an infrared
handheld programmer to make changes.
①
A Quick Start Wizard provides an easy step-by-step procedure to help you configure the device
for a simple application. There are two ways to access the wizard:
● locally, see Quick Start Wizard via the local display push buttons (Page 45) or Quick Start
Wizard via the handheld programmer (Page 52)
● from a remote location, see Quick Start Wizard via SIMATIC PDM (Page 61) or Operating via
AMS Device Manager (Page 77). For the complete list of parameters, see Parameter
Reference (Page 105).
6.4.2

Quick Start Wizard via the local display push buttons

1. Press RIGHT
2. Choose Quick Start (1.), and then Quick Start Wizard (1.1.).
3. Follow the steps then choose Finish to save Quick Start parameter changes and return to
Program menu, or press LEFT
To add or delete digits using the push buttons:
When the enter icon
delete the right-most digit, RIGHT
1. Navigate to the parameter you wish to modify and press RIGHT
be highlighted.
2. Press UP
value from the left-most digit, starting with the plus/minus sign.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
push buttons
to enter Program Mode.
is lit, press UP
or DOWN
6.4 Commissioning via local display
to return to Measurement mode.
to insert a digit on the right, DOWN
to accept the value, or LEFT
to delete the highlighted value, or LEFT
Commissioning
to
to cancel.
to edit it. The value will
to modify the
45