Step 2 – Application
Note
Application selection
• Selecting STEEL changes the setting for POSITION DETECT (2.7.3.3) (Page 122) to
Rising Edge. and for ALGORITHM (2.7.3.1) (Page 122) to F.
• Selecting CONCRETE changes the setting for POSITION DETECT (2.7.3.3) (Page 122)
to Rising Edge and for ALGORITHM (2.7.3.1) (Page 122) to ALF.
Select the application type (steel or concrete silo construction), operation type (level, space, or
distance) and then click on NEXT.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
Operating
7.1 Remote operation
63