8.3.13.5
REMINDER ACTIVATION (3.7.5.)
Note
Access
To modify this parameter via SIMATIC PDM it must be accessed via the pull-down menu
Device – Maintenance.
Factory setting:
Setting range:
Purpose:
Description:
8.3.13.6
LIFETIME EXPECTED (3.7.6.)
Note
The device always operates in years. Changing the units affects only the parameter view of
the Remaining Sensor Lifetime parameters in SIMATIC PDM.
Factory setting:
Setting range:
Purpose:
Description:
8.3.13.7
MAINTENANCE STATUS (3.7.7.)
Indicates which level of maintenance reminder is active.
In SIMATIC PDM, open the menu Diagnostics > Device Diagnostics, click on the Maintenance
tab, and check the Calibration Schedule Status window.
8.3.13.8
ACKNOWLEDGE STATUS (3.7.8.)
Indicates which level of maintenance reminder has been acknowledged.
In SIMATIC PDM, open the menu Diagnostics > Device Diagnostics, click on the Maintenance
tab, and check the Calibration Schedule Status window.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
OFF
Reminder 1 (Maintenance Required), Reminder 2 (Maintenance Demand-
ed), Reminders 1 and 2, OFF
Allows you to enable a maintenance reminder.
1. First set the values in Reminder 1 (Required) (3.7.3.)/Reminder 2 (De-
manded) (3.7.4.).
2. Select the desired Reminder Activation option.
10.00 years
0 to 20 years
Allows you to override the factory default.
Units: hours, days, years, are selectable only via SIMATIC PDM.
Parameter Reference
8.3 DIAGNOSTICS (3.)
137