Calibration Interval (4.8.6.); Maintenance Status (4.8.7.); Acknowledge Status (4.8.8.); Acknowledge (4.8.9.) - Siemens SITRANS LR560 Operating Instructions Manual

8.4.8.6

CALIBRATION INTERVAL (4.8.6.)

Note
The device always operates in years. Changing the units affects only the parameter view of
the Calibration Interval parameters in SIMATIC PDM.
Factory setting:
Setting range:
Purpose:
Description:
8.4.8.7

MAINTENANCE STATUS (4.8.7.)

Indicates which level of maintenance reminder is active.
In SIMATIC PDM, open the menu Diagnostics > Device Diagnostics, click on the Maintenance
tab, and check the Calibration Schedule Status window.
8.4.8.8

ACKNOWLEDGE STATUS (4.8.8.)

Indicates which level of maintenance reminder has been acknowledged.
In SIMATIC PDM, open the menu Diagnostics > Device Diagnostics, click on the Maintenance
tab, and check the Calibration Schedule Status window.
8.4.8.9

ACKNOWLEDGE (4.8.9.)

Purpose:
Description:
8.4.9

STORED SOFTWARE VERSION (4.9.)

Displays the version string of the firmware previously uploaded to the local display (if any).
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
1.0 year
0 to 20 years
User-configurable recommended time between product inspections.
Units: hours, days, years, are selectable only via SIMATIC PDM.
Acknowledges the current maintenance reminder.
To acknowledge a reminder via SIMATIC PDM:
Open the menu Diagnostics > Device Diagnostics and click on the tab
•
Maintenance.
In the Calibration Schedule section, click on Acknowledge Warnings.
•
To acknowledge a reminder via the local control buttons or hand-held program-
mer:
Press RIGHT arrow twice to open parameter view and activate Edit Mode.
•
Press RIGHT arrow to acknowledge the reminder.
•
Parameter Reference
8.4 SERVICE (4.)
145