Parameter Reference
8.3 DIAGNOSTICS (3.)
8.3.10
MAXIMUM SECONDARY VALUE (3.4.6.)
The maximum recorded Secondary Value from the Analog Input Function Block 1.
8.3.11
ELECTRONIC TEMPERATURE (3.5.)
8.3.11.1
MINIMUM VALUE (3.5.1)
Note
Read/write
Read only in PDM or AMS. Can be written via the handheld programmer.
Displays (in °C) the minimum temperature recorded by the internal electronics. The high and low
values are maintained over a power cycle.
Via SIMATIC PDM navigate to Maintenance and Diagnostics > Electronics Temperature.
8.3.11.2
MAXIMUM VALUE (3.5.2)
Note
Read/write
Read only in PDM or AMS. Can be written via the handheld programmer.
Displays (in °C) the maximum temperature recorded by the internal electronics. The high and
low values are maintained over a power cycle.
Via SIMATIC PDM navigate to Maintenance and Diagnostics > Electronics Temperature.
8.3.11.3
INTERNAL TEMPERATURE (3.5.3)
Read only. Displays (in °C) the current temperature on the circuit board recorded by the internal
electronics.
For access via SIMATIC PDM open the menu View – Process Variables and check the field
Electronics Temperature.
132
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD