Siemens SITRANS LR560 Operating Instructions Manual page 85

Operating
7.1 Remote operation
Step 3 – Ranges
Note
Response rate
Selecting SLOW Response Rate changes setting for AVERAGE AMOUNT (2.7.5.3.)
(Page 126) to 0.9.
1. Click on Step 3.
2. Change units if desired (in meters by default).
3. Set High and Low Calibration points.
4. Set Response Rate.
5. Click on Apply.
84
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD