5.4
Nameplates for hazardous area installations
Note
Sample nameplate
The serial number and assembly location shown on the nameplate are given as examples
only.
HART
①
ATEX certificate
number
②
IECEx certificate
number
③
Safety notes
5.4.1
FM/CSA Class 1, Div 2 installation and connection diagram
The FM/CSA Class 1, Div 2 connection drawing A5E02795836 listed on the device nameplate
can be downloaded from our website LR560 (www.siemens.com/LR560). Go to Support >
Installation Drawings > Level Measurement > Continuous-Radar > SITRANS L560.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
5.4 Nameplates for hazardous area installations
The ATEX certificates can be found on the product website. Go to LR560
(www.siemens.com/LR560) > Support > Approvals/Certificates. For more
information on hazardous area approvals, see Approvals data (Page 165).
The IECEx certificate can be found on the IECEx website. Go to IECEX
(http://iecex.iec.ch) > Certified Equipment and enter the IECEx SIR number.
Potential electrostatic charging hazard. Do not clean with dry cloth. Do not
install where build-up of charge is likely. Use suitably rated cable. De-
energize before removing cover.
Connecting
39