Siemens SITRANS LR560 Operating Instructions Manual page 69

Operating
7.1 Remote operation
TVT shaper in PDM
①
TVT
Note
Transferring the new values to the device
If the TVT Shaper tab is closed without transferring new values to the device, the new values
will appear in the PDM list even though they have not been transferred to the device.
Echo profile
Note
• Double click on each axis to see the Xscale and Data Scale values.
• To zoom in to a section of the profile, left-click and drag a marquee around it. Right click
inside the window to zoom out.
• Expand or compress the x and/or y axes:
– Left-click on the axis and drag in either direction to reposition the low end of the scale.
– Right-click on the axis and drag in either direction to reposition the high end of the
• After saving a profile click on OK, not the x button, to close the Echo Profile Utilities
window, otherwise the profile will not be saved.
● In the Echo Profile Utilities window click the Echo Profile tab.
● Initial profile graph is blank upon entry to dialog. Click Measure to update the profile.
● It is recommended to use the Detailed resolution view of the echo profile for troubleshooting.
For faster and more coarse views, the Standard resolution may be used.
● Click Save and in the new window enter a name and click OK.
● Click OK to exit.
68
②
cursor
scale.
③
echo profile
Operating Instructions, 06/2017, A5E34647946-AD
SITRANS LR560 (mA/HART)