Step 2 – Application
Note
Application type settings
• Selecting either STEEL or CONCRETE does a functional reset, see Master reset
(Page 79).
• Selecting STEEL changes the setting for POSITION DETECT (2.7.3.3) (Page 122) to
Rising Edge. and for ALGORITHM (2.7.3.1) (Page 122) to F.
• Selecting CONCRETE changes the setting for POSITION DETECT (2.7.3.3) (Page 122)
to Rising Edge and for ALGORITHM (2.7.3.1) (Page 122) to ALF
1. Click on Step 2.
2. Select the application type (Steel or Concrete) and the operation (Level, Space, or Distance).
3. Click on Apply.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
Operating
7.1 Remote operation
83