Hazardous Area Installations; Product Nameplate; Instructions Specific To Hazardous Area Installations - Siemens SITRANS LR460 HART Operating Instructions Manual

Hazardous area installations

Product Nameplate

The nameplate shown is a typical example. Please check the nameplate on your
Note:
device for your specific device configuration.
SITRANS LR 460
7ML5426-0AA00-0AC-0
Serial #
Power Rating:
Enclosure:
Amb. Temp.:
Output:

Instructions specific to hazardous area installations

(Reference European ATEX Directive 94/9/EC, Annex II, 1/0/6)
Installation shall be performed only by qualified personnel and in accordance
Note:
with local governing regulations.
The following instructions apply to equipment covered by certificate number
Sira 06 ATEX 9218X.
1. For use and assembly, refer to the main instructions.
2. The equipment is certified for use as Category II 1D, 1/2 D & 2D equipment. The
Essential Health and Safety Requirements are assured by compliance with
IEC 61241-0: 2004 and IEC 61241-1: 2004.
3. The equipment may be used with dust and fibers with apparatus temperature
class T (see table
A5E42035355
Radar Level Meter
GYZ/S1034567
100 - 230 V , ±15%, 50/60 Hz, 6 W
TYPE/NEMA 4X, 6 / IP67
– 40°C to 65°C
4 - 20 mA HART
IECEx SIR 06.0058X
Ex tD A20 IP67 T85°C
Do Not Open in an explosive dust atmosphere.
Siemens Milltronics Process Instruments Inc., Peterborough
Made in Canada
Thermal Data for 7ML5426 Series
SITRANS LR460 – INSTRUCTION MANUAL
0518
0891
Canada 267P-LR460
II 1D, 1/2 D, 2D
Ex tD A20 IP67 T85°C
SIRA 06ATEX9218X
on page 26).
Page 25