Connecting
4.4 Nameplates for hazardous area installations
6. Ground the instrument according to local regulations.
7. Tighten the gland to form a good seal.
8. Replace optional display and device lid.
9. Tighten locking screw.
If cable is routed through conduit, use only approved suitable-size hubs for waterproof
1)
applications.
Removing the lid and display
4.4
Nameplates for hazardous area installations
Note
Sample nameplate
The serial number and assembly location shown on the nameplate are given as examples
only.
26
Terminal block
1
①
cable gland (or NPT cable entry
②
cable shield
③
instrument connection
Compact Operating Instructions, 06/2018, A5E39693895-AA
2
3
LR560