Nameplates For Hazardous Area Installations; Ma Hart; Device Nameplate (Atex/Iecex/Inmetro/Rcm); Device Nameplate (Fm/Csa) - Siemens SITRANS LR200 Compact Operating Instructions

Radar transmitters

Hide thumbs Also See for SITRANS LR200:

Table of Contents

4.3

Nameplates for hazardous area installations

4.3.1

4.3.1.1

①

4.3.1.2

①

● For wiring requirements: follow local regulations.

● Approved dust-tight and water-tight conduit seals are required for outdoor Type 4X /

TYPE 6, IP67, IP68 locations.

● Refer to Instructions specific to hazardous area installations (Page 25).

Note

Selecting a suitable PLC input module, power supply, or barrier requires knowledge about

Intrinsic Safety and the application. It is the responsibility of the installer to ensure that the

intrinsically safe installation complies with both the apparatus approval requirements and the

relevant national code of practice.

SITRANS LR200

Compact Operating Instructions, 05/2019, A5E46957579-AD

The ATEX certificate can be downloaded from the product page of our website at

www.siemens.com/LR200 (www.siemens.com/LR200). Go to Support > Approvals / Certifi-

cates.

The IECEx certificate listed on the nameplate can be viewed on the IECEx website. Go to:

http://iecex.iec.ch (http://iecex.iec.ch) and click on Ex Equipment Certificates of Conformity

then enter the certificate number IECEx SIR 13.0006X.

FM Intrinsically Safe connection drawing number A5E01003040 and CSA Intrinsically Safe

connection drawing number A5E01003039 can be downloaded from the product page of our

website at: www.siemens.com/LR200 (www.siemens.com/LR200). Go to Support > Installation

Drawings > Level Measurement > Continuous - Radar.

Table of Contents