Secondary Value; Simulate Enable; Demo Mode; Communication - Siemens SITRANS LR560 Operating Instructions Manual

4.11. Secondary Value

The value displayed in the secondary region of the LCD, in Measurement Mode . [See
The LCD Display on page 31, area (6) under Normal operation.]
Use Secondary Value to capture the menu navigation path to a selected parameter,
and store a custom secondary value [for example, Echo Strength (2.4.7.2.)].
While in Parameter View
key. This stores the path to the selected parameter in Secondary Value, and displays
that value in the secondary region of the LCD display when in Measurement Mode.

4.12. Simulate Enable

Replaces a physical jumper switch found on some FF devices to enable simulation
when set to ON. (Available only via local operation.)
Options
For more information on Simulation, see
Device Manager, or the manual,
(7ML19985MP01)

4.13. Demo Mode

Reduces the time between measurements and the accuracy for demonstration
purposes.

5. Communication

Note: Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly stated.

5.1. Tag

The user-defined description for the device.
To access this parameter via AMS Device Manager see Identification under
Identification (RESOURCE)
1)
Parameter view
See
Page 120 SITRANS LR560 (FF) – INSTRUCTION MANUAL
1)
mode of the selected parameter, press the decimal point
* OFF Simulation Disabled
ON Simulation Enabled
Foundation Fieldbus for Level instruments
.
on page 61.
on page 31, under
Simulation (Input)
on page 51 in AMS
Program mode
.
7ML19985LY01