Secondary Value; Simulate Enable; Communication; Tag - Siemens SITRANS LR250 Operating Instructions Manual

4.11. Secondary Value

Use the secondary value to capture the menu navigation path to currently viewed
parameter, and store it as the path to the custom secondary value.
While in Parameter View of the current parameter (see Parameter view on page 32),
press the decimal point key. This stores the path to the current parameter in the
Secondary Value, and displays the value for that parameter on the LCD display when
in Measurement Mode. [See The LCD Display on page 31, area (6) under Normal
operation.]

4.12. Simulate Enable

Replaces a physical jumper switch found on some FF devices to enable simulation
when set to ON. (Available only via LUI.)
Options
For more information on Simulation, see Simulation (Input) on page 50 in AMS Device
Manager. [See also Simulation under How the AIFB works in manual
Fieldbus for Level Instruments

5. Communication

Note: Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly stated.

5.1. Tag

Note:
The tag can only be changed from a remote master such as NIFBUS-
Configurator or DeltaV.
Read only. Text that can be used in any way. A recommended use is as a unique
label for a field device in a plant. Limited to 32 ASCII characters.

5.2. Device Address

Note:
The address can only be changed from a remote master such as NIFBUS-
Configurator or DeltaV. See Addressing in manual
Instruments
Read only. The unique address of the device on the network.
Values

5.3. Manufacturer

Name of manufacturer associated with this device.
Page 128 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS
* OFF
ON
(7ML19985MP01)].
(7ML19985MP01) for further details.
Temporary range during initial commissioning: 248 - 251.
Permanent range after commissioning complete (written to non-volatile
memory in the device): 16-247
Simulation Disabled
Simulation Enabled
Foundation Fieldbus for Level
Foundation
7ML19985KL01