Platform - Omron LD-60 User Manual

Platform

The platform comes packed in a wooden crate, mounted on a pallet, with wooden covers. See
the following figure.
The docking station, joystick, and platform are shipped in the same crate.
Retain all parts and fasteners removed for possible repacking.
1. Remove the four Klimp clips from the front panel.
2. Remove the two lag screws at the bottom of each end of the crate cover.
3. Undo the four spring-loaded latches and remove the front panel of the crate.
Chapter 3: Setup
Top Klimp Clips
Bottom Klimp Clips
Figure 3-2. Front Panel of Shipping Crate
Figure 3-3. Lag Screw at Bottom of Crate End
LD Platform User's Guide, 11970-000 Rev E
Page 28 of 142
Front Panel/Ramp