Omron LD-60 User Manual page 122
Mobile robot platform
Hide thumbs
Also See for LD-60:
- User manual (178 pages) ,
- Assembly instructions manual (55 pages) ,
- Manual (12 pages)
Table of Contents
Advertisement
The underside of this plate has a connector that makes an electrical connection with a
mating connector inside the laser.
3. Put the existing laser top onto the top of the new laser.
You will feel slight resistance as the two connectors plug into each other.
4. Connect the black top plate to the new laser, using the four retained screws.
LD Platform User's Guide, 11970-000 Rev E
Chapter 8: Maintenance
Figure 8-17. Safety Scanning Laser
Figure 8-18. Connectors Inside Laser Cap
Page 122 of 142
Advertisement
Table of Contents
