Refer to Removing and Installing Covers in the Maintenance section for cover removal and
installation details.
1. Remove the inner rear platform cover.
a. Pull the bottom of the cover away from the platform chassis.
This is easiest if you grip it with two hands, toward the center.
b. Lower the cover down, so its top tab clears the rear outer cover.
2. Unlatch and open the battery compartment door, at the back of the platform.
The battery compartment door is capable of being locked. You may need to unlock it.
LD Platform User's Guide, 11970-000 Rev E
Chapter 3: Setup
Figure 3-11. Lowering the Rear Platform Cover
Page 34 of 142