Fuel And Hydraulic Tanks; Fuel Tank - Genie S-105 Service Manual

June 2011
REV A
11-1

Fuel Tank

How to Remove the Fuel Tank
Explosion and fire hazard. Engine
fuels are combustible. Remove the
fuel tank in an open, well-
ventilated area away from heaters,
sparks, flames and lighted
tobacco. Always have an
approved fire extinguisher within
easy reach.
Explosion and fire hazard. Never
drain or store fuel in an open
container due to the possibility of
fire.
1 Remove the fixed engine side turntable cover.
See 5-1, How to Remove a Fixed Turntable
Cover .
2 Tag, disconnect and plug the fuel supply and
return hoses. Cap the fittings on the fuel tank.
3 Remove the fuel filler cap from the tank.
4 Using an approved hand-operated pump, drain
the fuel tank into a suitable container. See
capacity specifications.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Note: Be sure to only use a hand operated pump
suitable for use with diesel fuel.
Part No. 102916

Fuel and Hydraulic Tanks

5 Remove the fuel tank hold down strap retaining
fasteners. Remove the straps from the fuel
tank.
6 Support and secure the fuel tank to an
appropriate lifting device.
7 Remove the fuel tank from the machine.
Note: Clean the fuel tank and inspect
for cracks and other damage before installing.
S-100 • S-105 • S-120 • S-125
Section 4 • Repair Procedures
Crushing hazard. The fuel tank
may become unbalanced and fall
if it is not properly supported and
secured to the lifting device.
Component damage hazard. The
fuel tank is plastic and may
become damaged if it is allowed to
fall.
4 - 125