Fuel And Hydraulic Tanks; Fuel Tank - Genie S-80 Service And Repair Manual

October 2016
9-1

Fuel Tank

How to Remove the Fuel Tank
Explosion and fire hazard.
Engine fuels are combustible.
Perform this procedure in an
open, well-ventilated area away
from heaters, sparks, flames and
lighted tobacco. Always have an
approved fire extinguisher within
easy reach.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Explosion and fire hazard. Never
drain or store fuel in an open
container due to the possibility of
fire.
1 Turn the manual fuel shutoff valve to the
closed position (if equipped).
2 Remove the fuel filler cap from the tank.
3 Using an approved hand-operated pump, drain
the fuel tank into a suitable container. Refer to
Specifications, Machine Specifications.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Note: Be sure to only use a hand operated pump
suitable for use with gasoline and diesel fuel.
Part No. 1269074

Fuel and Hydraulic Tanks

4 Tag, disconnect, drain and plug the supply and
return fuel hoses. Cap the fittings on the fuel
tank.
5 Remove the fuel tank retaining fasteners.
6 Remove the fuel tank from the machine.
Note: Clean the fuel tank and inspect for damage
before installing it onto the machine.
S-80 • S-85 • S-80X
Service and Repair Manual
Component damage hazard. The
fuel tank is plastic and may
become damaged if allowed to
fall.
Component damage hazard.
When installing the plastic fuel
tank, do not overtighten the
retaining fasteners.
75