Checklist C Procedures; Perform Engine Maintenance - Deutz Models; Perform Engine Maintenance - Cummins Models - Genie S-105 Service Manual

Section 3 • Scheduled Maintenance Procedures

Checklist C Procedures

C-1
Perform Engine Maintenance -
Deutz Models
Engine specifications require that this procedure be
performed every 500 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Deutz F4L913 Operation Manual
(Deutz part number 0297 7341) OR the
Deutz BF4L2011 Operation Manual
(Deutz part number 0297 9929).
Deutz F4L913 Operation Manual
Genie part number
Deutz BF4L2011 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
3 - 44
C-2
Perform Engine Maintenance -
Cummins Models
Engine specifications require that this procedure be
performed every 500 hours or 6 months, whichever
comes first.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Cummins B4.5 Operation and Maintenance Manual
(Cummins part number 4021389-01).
Cummins B4.5 Operation and
Maintenance Manual
Genie part number
62446
To access the engine:
84794
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
S-100 • S-105 • S-120 • S-125
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
Part No. 102916
June 2011
REV B
107527