Platform Manifold Components, S-100 And S-120 Models - Genie S-105 Service Manual

Section 4 • Repair Procedures
MANIFOLDS
10-10

Platform Manifold Components, S-100 and S-120 Models

The platform manifold is mounted to the platform mounting weldment.
Index
No. Description
1 Proportional solenoid valve,
3 position 4 way ................................ GH ........ Platform level up/down ..................... 18-20 ft-lbs / 24-27 Nm
2 Check valve ....................................... GF ......... Platform rotate circuit
3 Check valve ....................................... GJ ......... Platform level circuit
4 Accumulator, 500 psi / 34.5 bar ........ GM ........ Hydraulic dampening .................................. 23 ft-lbs / 31 Nm
5 Differential sensing valve, N.O. ......... GI .......... Platform level differential
6 Differential sensing valve, N.O. ......... GE ........ Platform rotate differential
7 Orifice - plug, 0.030 inch / 0.762 mm GB ........ Platform rotate left circuit
8 Orifice - plug, 0.030 inch / 0.762 mm GC ........ Platform rotate right circuit
9 Shuttle valve ...................................... GG ........ Platform level load sense circuit ....... 7.4-9 ft-lbs / 10-12 Nm
10 Shuttle valve ...................................... GA ........ Platform rotate load sense circuit ...... 7.4-9 ft-lbs / 10-12 Nm
11 Differential sensing valve, N.C. ......... GC ........ Directs flow to functions .................... 23-25 ft-lbs / 31-34 Nm
12 Proportional solenoid valve,
3 position 4 way ................................ GD ........ Platform rotate left/right ..................... 18-20 ft-lbs / 24-27 Nm
4 - 100
Schematic
Item Function
sensing circuit ................................... 23-25 ft-lbs / 31-34 Nm
sensing circuit ................................... 23-25 ft-lbs / 31-34 Nm
S-100 • S-105 • S-120 • S-125
June 2011
REV A
Torque
Part No. 102916