B-6 Perform Engine Maintenance - Deutz Models - Genie S-105 Service Manual

June 2011
REV E
B-5
Perform Hydraulic Oil Analysis
Genie requires that this procedure be performed
every 250 hours or quarterly, whichever comes
first.
Replacement or testing of the hydraulic oil is
essential for good machine performance and
service life. Dirty oil and a clogged suction strainer
or hydraulic filters may cause the machine to
perform poorly and continued use may cause
component damage. Extremely dirty conditions
may require oil changes to be performed more
often.
Note: Before replacing the hydraulic oil, the oil may
be tested by an oil distributor for specific levels of
contamination to verify that changing the oil is
necessary. If the hydraulic oil is not replaced at
the two year inspection, test the oil quarterly.
Replace the oil when it fails the test.
See E-1, Test or Replace the Hydraulic Oil.
Part No. 102916
Section 3 • Scheduled Maintenance Procedures
B-6
Perform Engine Maintenance -
Deutz Models
Engine specifications require that this procedure be
performed every 250 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Deutz F4L913 Operation Manual
(Deutz part number 0297 7341) OR the
Deutz BF4L2011 Operation Manual
(Deutz part number 0297 9929).
Deutz F4L913 Operation Manual
Genie part number
Deutz BF4L2011 Operation Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
S-100 • S-105 • S-120 • S-125
CHECKLIST B PROCEDURES
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
62446
84794
3 - 21