Perform 30 Day Service - Genie S-105 Service Manual

June 2011
REV B
Medium and high pressure filters
Note: The medium and high pressure filters are
mounted to the engine side bulkhead.
4 Inspect the filter condition indicators.
a
a high pressure filters
b filter condition indicators
c medium pressure filter
Result: The filter condition indicators should be
operating with the plungers in the green area. If
any of the indicators display the plunger in the
red area , this indicates that a hydraulic filter is
being bypassed and the filter needs to be
replaced. See D-11, Replace the Hydraulic Filter
Elements.
Part No. 102916
Section 3 • Scheduled Maintenance Procedures
A-7

Perform 30 Day Service

The 30 day maintenance procedure is a one time
sequence of procedures to be performed after the
first 30 days or 40 hours of usage. After this
b interval, refer to the maintenance checklists for
continued scheduled maintenance.
1 Perform the following maintenance procedures:
• A-10
c
• B-9Inspect the Tires, Wheels,
• B-10
• D-4Check the Turntable Rotation
• D-11
S-100 • S-105 • S-120 • S-125
CHECKLIST A PROCEDURES
Grease the Turntable Rotation
Bearing and Rotate Gear
and Lug Nut Torque
Check the Drive Hub Oil Level
and Fastener Torque
Bearing Bolts
Replace the Hydraulic Filter
Elements
3 - 11