Hydraulic Component Specifications - Genie S-105 Service Manual

June 2011
REV E
Hydraulic Component
Specifications
Drive pump
Type: bi-directional variable displacement piston pump
Displacement
Flow rate @ 2350 rpm, maximum
Drive pressure, maximum
Charge pump
Type:
Displacement
Flow rate @ 2350 rpm
Charge pressure @ 2350 rpm
Neutral position
Function pump
Type: variable displacement piston pump
Front Section
Displacement
Flow rate @ 2350 rpm, maximum
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Part No. 102916
Rear Section
Displacement
Flow rate @ 2350 rpm, maximum
0 to 2.8 cu in
Pressure, maximum continuous
0 to 46 cc
28.5 gpm
Standby pressure
108 L/min
3625 psi
250 bar
Auxiliary pumps
Type:
gerotor
Displacement
0.85 cu in
13.9 cc
9 gpm
Function manifold
34 L/min
Function relief pressure
315 psi
(measured at
21.7 bar
Platform relief pressure
(measured at
Jib and platform manifolds
Platform rotate and platform level
flow regulator
0 to 1.71 cu in
Jib manifold flow regulator
0 to 28 cc
17.4 gpm
65.9 L/min
S-100 • S-105 • S-120 • S-125
Section 2 • Specifications
SPECIFICATIONS
fixed displacement gear pump
port)
TEST
port 2)
TEST
0 to 1.1 cu in
0 to 18 cc
11.2 gpm
42.4 L/min
3350 psi
231 bar
250 psi
17 bar
0.15 cu in
2.47 cc
2600 psi
179.3 bar
3000 psi
207 bar
0.3 gpm
1.14 L/min
2 gpm
7.6 L/min
2 - 7