Introduction; Serial Number Information - Genie S-105 Service Manual

Introduction

Introduction
Important
Read, understand and obey the safety rules and
operating instructions in the Genie S-100 and
Genie S-105 Operator's Manual or the Genie S-
120 and Genie S-125 Operator's Manual before
attempting any maintenance or repair procedure.
This manual provides detailed scheduled
maintenance information for the machine owner
and user. It also provides troubleshooting fault
codes and repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical skills are
required to perform most procedures. However,
several procedures require specialized skills, tools,
lifting equipment and a suitable workshop. In these
instances, we strongly recommend that
maintenance and repair be performed at an
authorized Genie dealer service center.
Compliance
Machine Classification
Group B/Type 3 as defined by ISO 16368
Machine Design Life
Unrestricted with proper operation, inspection and
scheduled maintenance.
Technical Publications
Genie Industries has endeavored to deliver the
highest degree of accuracy possible. However,
continuous improvement of our products is a Genie
policy. Therefore, product specifications are
subject to change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and all other manuals.
Contact Us:
http://www.genieindustries.com
e-mail: awp.techpub@terex.com
ii

Serial Number Information

Genie Industries offers the following
Service Manuals for these models:
Title
Genie S-100, S-105, S-120 and S-125
Service Manual
(from serial number 100 to 135)
(from serial number 100 to 403) .......... 62401
S-100 • S-105 • S-120 • S-125
Copyright © 2001 by Genie Industries
102916 Rev E June 2011
Second Edition, Fifth Printing
"Genie" and "S" are registered trademarks of
Genie Industries in the USA and many other
countries.
Printed on recycled paper
Printed in U.S.A.
June 2011
Part No.
Part No. 102916