Relay Layout - Genie S-105 Service Manual

Section 6 • Schematics

Relay Layout

a
b
a Fuel solenoid relay (Deutz F4L913 models only).
b Oil cooler relay.
c Engine cold start relay.
d Starter relay.
e Horn relay.
f Flashing beacon relay.
g CR17 relay (K7) - powers C35RPM circuit
(Hi/low solenoid).
h CR16 relay (K8) - powers C34SA circuit
(Engine cold start).
i CR12 relay (K4) - powers primary valves 1 and
2, ignition, glow plug, starter relay, generator, and
the boom retract, multifunction and platform rotate
valve coils.
j CR14 relay (K2) - powers P7R or S56PRV circuit
including the auxiliary valve, boom extend/retract
and turntable rotate valve coils.
k CR10 relay (K6) - powers C21IGN and C107AF
circuits (Fuel on/off solenoid and alternator field).
l CR15 relay (K1) - powers P22R or C03PBF circuit
(Boom up/down valve coil).
m CR13 relay (K5) - powers P_7 and throttle relay.
n CR11 relay (K3) - powers P-6R2 or P54ENG circuits.
6 - 10
c
d
n
S-100 • S-105 • S-120 • S-125
e
m
March 2011
REV A REV C
f
g
h
i
j
k
l
Part No. 102916