Route Info - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 4 Status Screens

4.2.2 Route Info

Routing is based on the destination address only and the CellPipe 7130 RG takes
the shortest path to forward a packet. Click Status > Route Info to access this
screen. Use this screen to view the internal routing table on the CellPipe 7130 RG.
Figure 12 Status > Route Info
The following table describes the labels in this screen.
Table 10 Status > Route Info
LABEL
Destination
Gateway
Subnet
Mask
Flag
Metric
Service
96
DESCRIPTION
This indicates the destination IP address of this route.
This indicates the IP address of the gateway that helps forward this route's
traffic.
This indicates the destination subnet mask of this route.
This indicates the route status.
Up: The route is up.
!(Reject): The route is blocked and will force a route lookup to fail.
Gateway: The route uses a gateway to forward traffic.
Host: The target of the route is a host.
Reinstate: The route is reinstated for dynamic routing.
Dynamic (redirect): The route is dynamically installed by a routing daemon
or redirect
Modified (redirect): The route is modified from a routing daemon or
rederict.
The metric represents the "cost of transmission". A router determines the
best route for transmission by choosing a path with the lowest "cost". The
smaller the number, the lower the "cost".
This indicates the name of the service used to forward the route.
CellPipe 7130 RG User's Guide