ZyXEL Communications CellPipe 7130 RG User Manual page 52

Chapter 2 Tutorials
Enter GR1 as the Policy Name. In this group, we will associate ppp0 (PVC 1) as
2
the WAN interface with 192.168.1.33 as the IP address. Select pppoe_0_0_33/
ppp0 from the WAN Interface list. Enter 192.168.1.33 as the Source IP
Address. Select the protocol and enter the source port, as well as the source MAC
address. Click Apply to finish the settings and go back to the Policy Forwarding
screen.
GR1 has been added successfully to the interface group list. Click Add to create
3
another interface group: GR2.
Enter GR2 as the Policy Name. In this group, we will associate atm1 (PVC 2) as
4
the WAN interface with 192.168.1.34 as the IP address. Select ipoe_0_0_34/
atm1 from the WAN Interface list. Enter 192.168.1.34 as the Source IP
Address. Again, select the protocol and enter the source port, as well as the
source MAC address. Click Apply to finish the settings and go back to the Policy
Forwarding screen.
52
CellPipe 7130 RG User's Guide