Policy Forwarding Setup - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 14 Policy Forwarding
The following table describes the labels in this screen.
Table 65 Advanced > Policy Forwarding
LABEL
Policy Name
SourceIP
Protocol
SourcePort
SourceMAC
WAN
Remove
Add

14.2.1 Policy Forwarding Setup

Click the Add button in the Policy Forwarding screen. Use this screen to
configure the required information for a policy route.
Figure 85 Policy Forwarding: Add
The following table describes the labels in this screen.
Table 66 Policy Forwarding: Add
LABEL
Policy Name
Source IP
Address
Protocol
Source Port
Source Mac
Address
Use Interface
Back
214
DESCRIPTION
This is the name of the rule.
This is the source IP address.
This is the transport layer protocol.
This is the source port number.
This is the source MAC address.
This is the WAN interface through which the traffic is routed.
Click the icon to remove a rule from the CellPipe 7130 RG. A window
displays asking you to confirm that you want to delete the rule.
Click this to create a new rule.
DESCRIPTION
Enter a descriptive name of up to 16 printable English keyboard
characters, including spaces.
Enter the source IP address.
Select the transport layer protocol (TCP or UDP).
Enter the source port number.
Enter the source MAC address.
Select a WAN interface through which the traffic is sent. You must have
the WAN interface(s) already configured in the WAN screens.
Click Back to return to the previous screen without saving.
CellPipe 7130 RG User's Guide