Table of Contents
Advertisement
Chapter 7 Wireless LAN
The following table describes the labels in this screen.
Table 35 Wireless LAN > MAC Filter > Add
LABEL
MAC
Address
Back
Apply
7.5 The More AP Screen
This screen allows you to enable and configure multiple wireless networks on the
CellPipe 7130 RG.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 46 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN > More AP
LABEL
#
Active
SSID
Security
Modify
152
DESCRIPTION
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the CellPipe 7130 RG in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
Click this to return to the previous screen without saving changes.
Click this to save your changes and go back to the previous screen.
DESCRIPTION
This is the index number of each SSID profile.
Select the check box to activate an SSID profile.
An SSID profile is the set of parameters relating to one of the CellPipe
7130 RG's BSSs. The SSID (Service Set IDentifier) identifies the Service
Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When
a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
This field indicates the security mode of the SSID profile.
Click the Edit icon to configure the SSID profile.
CellPipe 7130 RG User's Guide
Advertisement
Table of Contents
Troubleshooting
