ZyXEL Communications CellPipe 7130 RG User Manual page 279

Do not turn off the CellPipe 7130 RG while configuration file
upload is in progress.
After you see a "restore configuration successful" screen, you must then wait one
minute before logging into the CellPipe 7130 RG again.
Figure 133 Configuration Upload Successful
The CellPipe 7130 RG automatically restarts in this time causing a temporary
network disconnect. In some operating systems, you may see the following icon
on your desktop.
Figure 134 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.1). See
your computer's IP address.
CellPipe 7130 RG User's Guide
Appendix B on page 321
Chapter 24 Tools
for details on how to set up
279