6.3 The LAN IP Screen
Click Network > LAN to open the IP screen. See
background information. Use this screen to set the Local Area Network IP address
and subnet mask of your CellPipe 7130 RG.
Figure 36 LAN > IP
The following table describes the fields in this screen.
Table 28 LAN > IP
LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
DHCP Setup
CellPipe 7130 RG User's Guide
DESCRIPTION
Enter the LAN IP address you want to assign to your CellPipe 7130 RG
in dotted decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default).
Chapter 6 LAN Setup
Section 6.4 on page 134
for
133